Laminate ABS Re-Edging (rounded to the nearest meter)
Any cuts or short ends of worktops that will be visible in your kitchen/bathroom will require our re-edging service. This is applied by hand and completed in house to a very high standard.
E.g. if you require two 600 ends re-edging (1200mm) you would add one lot of re-edging to your basket. However, if you had three short ends (1800mm), you would need to purchase two lots (amount is rounded to the nearest meter).
Acrylic edged worktops offer a contemporary square edged profile, in order to imitate Stone and Real Wood worktops more than a standard laminate. Although both laminate and acrylic worktops are one of the most similar products on the market in terms of them both consisting of layers of plastic (laminate sheets) bonded to chipboard and craft paper, they also differ significantly due to the edging process. Due to the acrylic edging, we are required to use a non Petroleum based adhesive (so that the edging does not melt) and A clamps to secure the edging in place and leave to set for at least 12 hours. Due to the lengthy process, you will see a slight price increase below for the same services that we offer on a standard laminate worktop.