Laminate ABS Radius Corner ‘C’
CORNER C: This is the only option available if you require a square edge on a profiled worktop (profile means the little curve that is created when the laminate wraps around the front edge of a worktop). We would remove the ‘profile’, cut the radius corner and then re-edge the worktop for you.
PLEASE NOTE: Edging only comes in certain sizes (e.g. 1200mm strip) and in some cases the edging may have to be joined.
PLEASE NOTE: The cost for re-edging the cut, is already included in the price. If you require a certain radius for e.g. open housed shelves or curved units then we will need a template.
Acrylic edged worktops offer a contemporary square edged profile, in order to imitate Stone and Real Wood worktops more than a standard laminate. Although both laminate and acrylic worktops are one of the most similar products on the market in terms of them both consisting of layers of plastic (laminate sheets) bonded to chipboard and craft paper, they also differ significantly due to the edging process. Due to the acrylic edging, we are required to use a non Petroleum based adhesive (so that the edging does not melt) and A clamps to secure the edging in place and leave to set for at least 12 hours. Due to the lengthy process, you will see a slight price increase below for the same services that we offer on a standard laminate worktop.